Ajust valves

General Racing Discussion Area

Moderator: opnwhl23

70SSCamaro
Posts: 39
Joined: Sat Feb 14, 2009 11:24 pm

Ajust valves

Postby 70SSCamaro » Mon Mar 28, 2016 7:55 pm

Is there any one in Ozark of Springfield that could properly ajust my valves ??? Thanks I had some one do it where I live and he did a bad job. Its not running right . Engine only has 2400 miles on it. . Any info or contact would help. Have a nice day.
crankitup
Posts: 90
Joined: Mon Feb 16, 2009 8:57 pm
Location: Springfield, Mo.

Re: Ajust valves

Postby crankitup » Tue Mar 29, 2016 10:01 am

What type of lifters do you have, solid or hydraulic ? Roller or flat tappet? Also, where do you live?
70SSCamaro
Posts: 39
Joined: Sat Feb 14, 2009 11:24 pm

Re: Ajust valves

Postby 70SSCamaro » Tue Mar 29, 2016 12:29 pm

It is a solid roller Cam . And I live in Branson . But I can trailer it if need be . My phone # is 417 213 0567 Thanks
novice
Posts: 187
Joined: Tue Feb 24, 2009 10:20 am

Re: Ajust valves

Postby novice » Wed Mar 30, 2016 12:06 am

google "valve adjustment the right way", century performance has a write up that I used. looks like the right way to me. just need minimal skills to set lash. good luck. oh, by the way, you will need your cam card or some way to find out what the correct lash settings are for the intake and exhaust valves. hope this helps.
crankitup
Posts: 90
Joined: Mon Feb 16, 2009 8:57 pm
Location: Springfield, Mo.

Re: Ajust valves

Postby crankitup » Wed Mar 30, 2016 8:36 pm

70SScamaro, lets us know if you find the lash settings. If you still need help, let me know.
70SSCamaro
Posts: 39
Joined: Sat Feb 14, 2009 11:24 pm

Re: Ajust valves

Postby 70SSCamaro » Sun Apr 03, 2016 11:19 pm

I have my cam card Thanks . Beings Im 64 and have a bad knee . Its hard for me to get things done on my car. Thanks

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests