Register    Login    Forum    Search    FAQ

Board index » Classifieds » For Sale




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post Posted: Sun Feb 21, 2010 7:21 pm 
Offline

Joined: Fri Feb 13, 2009 6:02 pm
Posts: 60
I have a set of complete Yates C3 heads (minus rockers and stands), matching Ford motorsports intake, and a set of Bennett Racing valve covers for sale. The heads have a fairly fresh set of springs, about 45 runs on them. They were changed last winter. Fresh valve job last winter. 2.100" titanium intake and 1.600" exhaust valves. 40-42 cc chambers. I think they are 40cc but not 100% sure but they are small chambers. I don't have any flow numbers on these heads. The driver's side valve cover has two holes drilled in it, one for an oil filler cap that was a thread in set up for a vacuum pump and also a hole for the vacuum pump -12AN fitting threaded in set up fitting towards the front of the valve cover. The intake comes WITHOUT nitrous! The intake has bungs welded in for the Edelbrock E3 nozzle and has holes drilled and tapped for NOS soft plume nozzles for a total of two kits. The bungs were installed by Steve Johnson. The intake has an adapter from a 4150 to a 4500. If you unbolt the flange I think you can use the 4150 set up. I am not sure on that because I just bolted on the 4500 flange. I am wanting $2500 for everything and I'll pay shipping as long as it is in the US. I do accept pay pal but buyer will have to pay the 4% fee. Any questions or want to set up payment arrangements email me @ blake_yount@yahoo.com and call me at 573-225-4938. Thanks. I am going to try and attach photos so if they don't show up email me for pics request. Thanks for the space.

Image

Image

Image


Image

Image

_________________
'87 Mustang GT
X275 429" with two IS Foggers

[url]Image[/url]


Top 
 Profile  
 
 Post Posted: Mon Feb 22, 2010 7:59 pm 
Offline

Joined: Fri Feb 13, 2009 6:02 pm
Posts: 60
Since I am receiving a bunch of emails asking the same questions the nitrous is NOT included with intake. Also the valve covers don't include the oil filler cap and -12 AN vacuum pump fitting. The valve covers and intake are bare. Both are in good condition though. Thanks! Also intake came off a 9.5" block.

Make me an offer and I will give it some thought.

_________________
'87 Mustang GT
X275 429" with two IS Foggers

[url]Image[/url]


Top 
 Profile  
 
 Post Posted: Tue Feb 23, 2010 8:08 pm 
Offline

Joined: Fri Feb 13, 2009 6:02 pm
Posts: 60
I will separate the intake and heads so make an offer. thanks!

_________________
'87 Mustang GT
X275 429" with two IS Foggers

[url]Image[/url]


Top 
 Profile  
 
 Post Posted: Sun Feb 28, 2010 2:30 pm 
Offline

Joined: Fri Feb 13, 2009 6:02 pm
Posts: 60
$2000 obo. Need this stuff gone. Call me 573-225-4938 or email me blake_yount@yahoo.com

_________________
'87 Mustang GT
X275 429" with two IS Foggers

[url]Image[/url]


Top 
 Profile  
 
 Post Posted: Tue Mar 09, 2010 9:31 pm 
Offline

Joined: Fri Feb 13, 2009 6:02 pm
Posts: 60
I will take $1500 for the heads and that includes valve covers or $1650 for everything. I will pay for shipping anywhere in the US. Paypal will still have to add 4% to cover fees. Lets deal!!! 573-225-4938 and blake_yount@yahoo.com.

_________________
'87 Mustang GT
X275 429" with two IS Foggers

[url]Image[/url]


Top 
 Profile  
 
 Post Posted: Sat Apr 10, 2010 7:57 am 
Offline

Joined: Fri Feb 13, 2009 6:02 pm
Posts: 60
Everything SOLD! THanks for the space!

_________________
'87 Mustang GT
X275 429" with two IS Foggers

[url]Image[/url]


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 6 posts ] 

Board index » Classifieds » For Sale


Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 1 guest

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron