This is a Gen. 6 short block. 4.47 bore x 4.0 stroke 1 piece rear main seal. Forged crank, rods and pistons. Does not need to be bored. Hydraulic roller cam and lifters - 520 lift Sells new for $4800. I will take $2500 cash or 3000 trade value. I am not going too seperate at this time. Jim Kleine 417-366-0273
Last edited by PRO TREE on Sun Dec 09, 2012 8:03 am, edited 1 time in total.
Should have put this in original ad. For those who asked: This motor will have 8.75:1 compression with a large chamber 118cc head. It will have 10.75:1 comp. with a closed chamber 100cc head. With the cam it has now. it is rated at 450hp at 5250 rpm and 550 ft/lbs torque at 3500 rpm. It is a late model block, and does not have a provision for a manual fuel pump.
Users browsing this forum: No registered users and 1 guest
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum