need a good torque convertor if any one has one!!!!

Items Wanted - No Commercial Posts Please!

Moderators: Larry Jr., opnwhl23

brightracing8790
Posts: 15
Joined: Tue May 22, 2012 1:49 pm

need a good torque convertor if any one has one!!!!

Postby brightracing8790 » Mon May 28, 2012 3:31 pm

I am looking for a torque convertor if any one has one. I am looking for a 4500 stall even 5000 stall my budget is 400 for that would pay up to 800 for a neal chance, I dont want junk needs to hold up to 700 plus horse so if any one knows let me know
all-throttle-no-bottle

76 nova
377 sbc powered by griff.
formally known as the skittle
.
PRO TREE
Posts: 74
Joined: Mon Feb 23, 2009 11:30 am

Re: need a good torque convertor if any one has one!!!!

Postby PRO TREE » Mon May 28, 2012 5:03 pm

I have a Neal Chance Part #2005 SS torque converter. It is a 10 high stall race converter with a steel stator. According to their web site, this converter is built for 800+ HP for use with Nitrous, trans break or small blower. It went 5300 on the break behind a 355 in my 78 nova. It has glide splines. I will take 400$ for it. If interested, my # is 417-366-0273. Jim Kleine.
Last edited by PRO TREE on Tue May 29, 2012 7:36 am, edited 1 time in total.
User avatar
DirtFan34
Posts: 109
Joined: Sun Mar 29, 2009 11:01 am

Re: need a good torque convertor if any one has one!!!!

Postby DirtFan34 » Mon May 28, 2012 8:39 pm

I have a 8" tci race convertor stalls 4800 almost new would sell for $400. john long #417-849-6818
User avatar
julven
Posts: 198
Joined: Sun Feb 15, 2009 7:02 pm
Location: BUFFALO,MO

Re: need a good torque convertor if any one has one!!!!

Postby julven » Mon May 28, 2012 9:39 pm

Have you tried Marty for a new or even see what he has used?
Your local Hoosier Dealer
Image
417-733-4936
Thanks to Sponsors
C&R Transmission
WorkTurbochargers
Neal Chance Converters
bluecoupe
Posts: 30
Joined: Fri Feb 13, 2009 7:02 pm

Re: need a good torque convertor if any one has one!!!!

Postby bluecoupe » Sun Jun 10, 2012 1:49 pm

I have a MM converter that stalled 4500 I would sell for $350. I assume you need something for a glide?
brightracing8790
Posts: 15
Joined: Tue May 22, 2012 1:49 pm

Re: need a good torque convertor if any one has one!!!!

Postby brightracing8790 » Sun Jun 10, 2012 7:13 pm

well you would assume correctly yes we have a glide but we have a turbo output shaft so i can use a wide variety of convertors but we have already purchased on but I may be needing another one and what gears where you running with that torque convertor? thats my biggest prob
all-throttle-no-bottle

76 nova
377 sbc powered by griff.
formally known as the skittle
.
Larry Jr.
Posts: 936
Joined: Fri Feb 13, 2009 6:10 pm

Re: need a good torque convertor if any one has one!!!!

Postby Larry Jr. » Sun Jun 10, 2012 10:17 pm

your gonna need to go to the basement on your rear gears with a 377 sbc, unless your gonna smack it with spray.... your gonna need deep gears and a loose converter to make that 377 make torque in a heavier full bodied car
Image540


78 malibu
540 bb cchevy
2008 no-e track champ
bluecoupe
Posts: 30
Joined: Fri Feb 13, 2009 7:02 pm

Re: need a good torque convertor if any one has one!!!!

Postby bluecoupe » Mon Jun 11, 2012 5:49 am

I had a 4:10 gear with a 28" tire with that converter behind a 422 sbf. I agree with Larry on gearing. My current combo is a 368 sbf and I have a flash of 7200 on my chance converter and run a 4:86 gear.

Return to “Wanted”

Who is online

Users browsing this forum: No registered users and 0 guests