Bad Boy 8.5 Rules Updated 4/26/13

General Racing Discussion Area

Moderator: opnwhl23

admin
Site Admin
Posts: 50
Joined: Wed Jan 28, 2009 9:24 am

Bad Boy 8.5 Rules Updated 4/26/13

Postby admin » Fri Apr 26, 2013 8:36 am

Rules have been updated to match MW8.5RA rules on 4/26/13 - Change to Nitrous Line Section as follows;

Old - 6an line MAX from bottle to N20 solenoid with 12" MINIMUM of -4an off of N20 solenoid. Nano or other pressure regulating systems are allowed. Only a single N20 bottle may be mounted.

New Rule: Single line only from N20 bottle to N20 solenoid which may consist of a -6an line with -6an fittings MAX from bottle and must have a single reduced line that's 12" MINIMUM of -4an line with -4an fittings MAX entering N20 solenoid. Nano or other pressure regulating systems are allowed. Only a single N20 bottle may be mounted.
-4 line I.D. of .205 to .225 +/- .05
-4 fitting I.D. of .153-155 +/- .05 ***A spec line can be purchased from MW8.5RA

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 1 guest